Difference between revisions of "2021FallTeam1"
Jump to navigation
Jump to search
| Line 10: | Line 10: | ||
== Base Plate == | == Base Plate == | ||
[[File:BasePlateTeam1.PNG|500px]] | [[File:BasePlateTeam1.PNG|500px]] | ||
== Camera Mount == | == Camera Mount == | ||
[[File: | The camera mount was designed with two legs, a right and left shown in the images below respectively. The legs can each be attached to the base plate via two m3 screws. | ||
[[File: | |||
[[File:LeftCameraMount1.PNG|230px]] | |||
[[File:RightCameraMount1.PNG|300px]] | |||
= '''Final Project''' = | = '''Final Project''' = | ||
| Line 26: | Line 30: | ||
== Demonstration == | == Demonstration == | ||
Revision as of 18:47, 10 December 2021
Team Members
Jacob Ayers - Electrical Engineering (Year)
Ian Singson - Aerospace Engineering (Senior)
Shoh Mollenkamp - Computer Engineering (Year)
Our Robot
Base Plate
Camera Mount
The camera mount was designed with two legs, a right and left shown in the images below respectively. The legs can each be attached to the base plate via two m3 screws.
Final Project
Project Overview
Our final project aims to use image detection that will autonomously cue the robot to play a song or do a certain maneuver while it is going around the track. These images will be placed on the side of the track and will be detected by another webcam on the robot that is facing outward with respect to the track.