Difference between revisions of "2019SpringTeam3"

From MAE/ECE 148 - Introduction to Autonomous Vehicles
Jump to: navigation, search
(Mechanical)
Line 14: Line 14:
 
== Mechanical ==
 
== Mechanical ==
 
The camera is designed to be adjustable and can be easily locked in place with a screw and a nut. During our training, we need to find the optimal camera angle thus making the camera stand adjustable saved us a lot of time. The stand for the Structure Sensor is set to 30 degree of inclination since the camera itself has a wide range of view of 160 degrees and it needs to capture the IR patch that is attached to the back of a person. The Acrylic platform is printed with Laser-cut machine. Multiple mounting holes are cut for variety of mounting hardware choices if applicable.
 
The camera is designed to be adjustable and can be easily locked in place with a screw and a nut. During our training, we need to find the optimal camera angle thus making the camera stand adjustable saved us a lot of time. The stand for the Structure Sensor is set to 30 degree of inclination since the camera itself has a wide range of view of 160 degrees and it needs to capture the IR patch that is attached to the back of a person. The Acrylic platform is printed with Laser-cut machine. Multiple mounting holes are cut for variety of mounting hardware choices if applicable.
 +
[[File:Example.jpg]]

Revision as of 19:24, 28 May 2019

Introduction

The goal of our project is to follow a person using IR sensors. Under real world circumstances, the concept of our project can be applied to indoor self-following shopping cart system for supermarkets. The car can follow a person who has an IR LED patch attached at a certain range.

Team Members

Jose Manuel Rodriguez - ME

Yuan Chen - ME

Jason Nan - BENG: BSYS

Po Hsiang Huang - EE

Mechanical

The camera is designed to be adjustable and can be easily locked in place with a screw and a nut. During our training, we need to find the optimal camera angle thus making the camera stand adjustable saved us a lot of time. The stand for the Structure Sensor is set to 30 degree of inclination since the camera itself has a wide range of view of 160 degrees and it needs to capture the IR patch that is attached to the back of a person. The Acrylic platform is printed with Laser-cut machine. Multiple mounting holes are cut for variety of mounting hardware choices if applicable.

Error creating thumbnail: Unable to save thumbnail to destination