Difference between revisions of "2019FallTeam2"
|Line 200:||Line 200:|
=== Future Improvements ===
=== Future Improvements ===
== References ==
== References ==
Revision as of 03:01, 4 December 2019
Modify the Donkey Car framework and physical car to autonomously deliver personalized mail to multiple different destinations based on number. Ideally, the Donkey Car model will be trained to do autonomous laps while hugging the right side of the road. Upon recognizing a mailbox number using OpenCV, the car will stop, queue the right package to be delivered, push the package off the side of the vehicle and continue on to the next delivery.
- Must have:
- Deliver personalized mail to or directly in front of all destinations
- Nice to have
- Have control over where mail gets delivered to each driveway
- Train the car to hug the right side of the road in autonomous mode
- Andrew Ma, MAE
- Bijan Ardalan, MAE
- Lucas Hwang, ECE
Acrylic Mounting Plate
Our mounting plate was designed very early on in the design process so our specific requirements were largely unknown at the time. The acrylic piece was designed to allow standard size motors to be mounted in the center and fed down through the middle gap of the baseplate. It was also designed with holes for a couple different screw sizes for mounting different components onto it. thin slots were designed in the front and back for zip ties and larger slots were put on the sides for cable management. It was laser-cut with 1/4th inch acrylic since we had an idea
We originally angled our camera down 60 degrees from the vertical in order to capture a large image of the ground and track lines. However, in order to capture the numbers for our package delivery on the side of the road, we decreased the angle to 30 degrees to capture more of the horizon.
To house our Jetson Nano, we 3D printed a case taken off of Thingiverse at https://www.thingiverse.com/thing:3518410
Mail Delivery Mechanism
Choosing The Motors
Our design requirements were based on the need to precisely choose a package to deliver. We chose to use servo motors instead of DC motors because they have internal control systems which saves us from having to design and implement external sensors and a control system. Originally we used the servo motors already in the lockers, however we realized that they were "position" servos that had a limited degree of rotation. For our design that used a rack and pinion system, this wouldn't work, so instead of redesigning everything we ordered continuous rotation servos. The servos we used can be found here.  Our design uses two servo motors, one for each rack and pinion.
We ended up using neon pink construction paper with numbers drawn in black marker for our signs. This design was optimal as the construction paper was matte and did not have any glare when photos were taken with the webcam. We had tried using other materials like folders and we found that the glare off the surface made it hard for OpenCV to properly recognize contours. Additionally, we tried a few different colors of construction paper before settling on pink. The camera has a tendency of adding a blue tint to everything in the picture, so pink stood out the most out of all the colors. Additionally, we 3D printed stands for our signs and used cardboard as a backing so we would be able to freely switch out the color as well as rotate them. (Insert picture of sign here)
The software can be divided into two parts, which are the motor control and OpenCV number recognition respectively. For the motor control we created our own class called myMotor.py which was added into the parts folder. We based this file off the actuator.py file which already exists as a part in Donkey. myMotor.py contains two classes (myMotor and myMotorThrottle). The myMotor class is in charge of initialization of default values for the motor as well as interfacing with the PWM board (the PCA9685). The myMotorThrottle class contains methods which set the pulse for the motors and thereby controls how fast the motors spin.
To control the servo motors on top of the car, we used a modified version of actuator.py, which can be found in the default DonkeyCar parts file, since we used the same PWM board to control both the steering and throttle servos as well as the mail delivery servos. Once we created the class, it was simply a matter of adding it as a part to manage.py so the DonkeyCar framework recognized the part.
MyMotor.py takes advantage of the imported Adafruit PCA9685 library for the corresponding PWM board to set the PWM signal. We then manually determined the pulse time constant. The pulse time constant represents how much time it takes to move the slider one box over. For example, moving from box 3 to box 5 would mean spinning the motor for two times the pulse constant and so on. In order to change the default motor speeds, we added the part to the myconfig.py file found in the d3 directory as well as the config variables for the PWM pulses required to stop the motor, spin it clockwise, and spin it counterclockwise.
Neural Network Training
For our neural network training we did not make any changes to the original Donkeycar framework. We used about 12,000 records in order to train a model indoors. One of the main reasons we decided to train our car indoors, was due to the rainy weather outside. The rain not only damaged the signs that we created but also negatively affected our number recognition. This was because there was very low brightness when it rained as opposed to other times when we had trained the model, making it hard for our camera to recognize the proper contours needed for number recognition.
Although the number recognition software operates separately from the Donkeycar framework, it was important to train the model with the signs on the course. If we added the signs after the car had been trained, there was the possibility that the car would not know how to respond when seeing a sign. This is due to the fact that the model associates steering and throttle with a given array of RGB values. we concluded that if we were to introduce a sudden change in the RGB values (i.e. adding a neon pink sign to the course) that the model was accustomed to seeing, our model would not perform as well.
Number Recognition Methodology
Although number recognition can be done in a variety of ways, for our project we decided to use seven-segment number recognition. This process can be broken down into several steps:
1. Color Filtering
In order to create a region of interest within all photos taken by the camera on the car, we decided to make the sign neon pink. Therefore, the first action that we wanted the number recognition software to accomplish was recognizing cropping the photo to only look at the pink construction paper where the number was written. In order to do this, we created a mask using RGB filtering to filter out all colors except for pink. We also know that the sign will be on the right side of the screen so we automatically crop the photo to the right half. Here is a picture of the original input to our camera and the black and white mask we created after color filtering. White represents all pink within the photo and black represents every other color.
2. Contour Recognition
OpenCV defines a contour as any continuous line of the same color. For our software, there are two contours which need to be recognized. The first contour we call the display contour. This contour is the outline of the construction paper and is easily recognized within OpenCV after the color filtering has been applied. After cropping the photo to only the display contour, we need to recognize the digit contour. This is the contour formed by the digit drawn on the piece of construction paper. The photo is cropped for a final time after the digit contour is found. Two photos of both contours:
3. Seven Segement Recognition
After isolating the digit contour. The program splits the photo into seven different segments. It then compares how much of each segment is filled with white pixels. If over 50% of a segment is filled with white pixels, then the segment is considered to be present. After repeating this process, a lookup is performed on a dictionary which has digit values associated with each unique seven segment key.
Number Recognition Code
The code first defines a a dictionary for all 10 digits and the corresponding segements which light up in a seven segment display. Each 1, within the DIGITS_LOOKUP represents a lit up segement on a seven segment display.
Next, the code defines the upper and lower bounds for the RGB mask, applies the mask to the photo, and then crops the photo to only the right half.
The image is resized and an edge map is created. The program finds all contours within the edge map and then sorts them.
The program iterates through each contour and stops once it has found a contour of the right size. This contour becomes the display contour which represents the piece of pink construction paper.
The image is then cropped to just the display contour and a series of operations are applied in order to clean up the photo. This reduces noise and makes it easier to recognize the digit contour. The same process of looking for contours in then repeated to find the digit contour.
This is the second for loop which looks for the digit contour. Once a contour of the appropriate size is found, the image is again cropped to only the digit contour.
The seven segments are defined and for the digit contour and the program counts the number of pixels within each segment that are nonzero. If the number of "on" pixels in a given segment is greater than 50% of total pixels in the segment, then this segment is considered on. After all segments have been analyzed, a lookup is performed within the dictionary for the number which has these corresponding segments.
Switching between Delivering Mail and Driving Autonomously
For our project, we decided to not incorporate the mail delivery mechanism as part of the training. We felt that adding extra inputs to the model (servos A and B on top of the car), would introduce too many variables and make it harder for the car to properly drive itself. As a result, the OpenCV script on is solely used for number recognition and the Donkeycar framework is only used for autonomous driving. This creates an easy division of labor and allows us to test each piece of software individually in order to verify that it accomplishes its job. However, these two pieces of software cannot operate completely separately as they must work together on the same car. Therefore, in order to integrate the two different pieces of software, we incorporated the OpenCV script into the update_parts method within Donkeycar. Each time update_parts runs, a photo is taken and ran through the OpenCV script. If no number is recognized, the car continues driving. However, if the script recognizes a number, then the throttle for the car is set to zero and the motor sequence is started. After the motor sequence finishes, the throttle is reset and the car can continue driving autonomously. Additionally, we implemented a previous digit instance variable which prevents the car from continually recognizing the same digit while it is stopped. If the digit recognized is the same as the previous digit, then the car continues to run. In this way, the car is always trying to drive itself and the throttle is simply cut if an appropriate number is recognized.
Final Implementation In Donkey
Challenges and Solutions
The Final Prototype
Mail Delivery In Action
While driving autonomously (local angle mode), the car is able to do laps around the track and stop at the signs to deliver the 3D printed packages. The car delivers the third package to the sign labeled three and the fourth package to the sign with the four. After delivering the package, the car is able to resume driving around the track.
The package delivery also works in full autonomous mode.
We could improve our DonkeyCar by improving the precision of the mail delivery and the robustness and accuracy of the number recognition system.
Primarily, there are many changes we could make to the package delivery system. Some ideas include:
- Implementing a control system with limit switches as end stops. We could then replace hard coded values such as the pulse time constant with a more robust system that can respond to any environmental factors that affect the speed of the pinion.
- Decrease the weight of the mechanical components.
- Add an additional driving routine that aligns the car with a driveway or a mailbox before pushing off the package.
- Replace the pushing rack and pinion mechanism with a pick and place mechanical arm to more precisely place package at delivery location as well as deliver packages more delicately.
We could also increase the robustness of the number recognition system:
- Take advantage of the GPU's on the Nvidia Jetson to implement a neural net to recognize numbers. (say how this improves model here)
- Our current system requires us to drive relatively slowly to ensure that we don't miss the number signs in between camera captures.