Difference between revisions of "2019FallTeam1"

From MAE/ECE 148 - Introduction to Autonomous Vehicles
Jump to navigation Jump to search
Line 81: Line 81:
Our first goal is to provide rear collision prevention. When another car is going to crash into the back of our car and there is no obstacle in front of our car. We can move forward to prevent a collision.
Our first goal is to provide rear collision prevention. When another car is going to crash into the back of our car and there is no obstacle in front of our car. We can move forward to prevent a collision.
===Safe lane changing===
===Safe lane changing===
[[https://en.m.wikipedia.org/wiki/Vehicle_blind_spot#/media/File%3ABlindspot_three_cars_illus.svg|thumb|Blind spot]]
[[File: https://en.m.wikipedia.org/wiki/Vehicle_blind_spot#/media/File%3ABlindspot_three_cars_illus.svg|thumb|Blind spot]]
When changing lane,
When changing lane,



Revision as of 21:52, 11 December 2019

Team Members

  • Harou Xue - Electrical Engineering
  • Yuhan Zhang - Electrical Engineering
  • Cheyenne Herrera - Math/Engineering

Project Objectives

The goal of our project is to create a miniature version of a Tesla. We wanted to increase the safety of the self-driving car by implementing rear-end collision prevention as well as apply the lane change safety. The Donkey RoboCar will stop itself when approaching an object in the front using a TOF sensor mounted to it. Additionally, the car will speed up if a vehicle/object is approaching it from behind. Furthermore, the RoboCar will implement lane change on command.

Mechanical Design

Board.png


Camera Mount.png


Adjustable Camera Holder.png

Electronic Design

Components

  • Jetson Nano with fan and wirless card installed
  • PCA9685 PWM (control servo and ESC)
  • Steering Servo (control steering)
  • Electronic speed controller (ESC) (control throttle)
  • Relay (provide emergency stop)
  • LED (show emergency stop status)
  • power
  • USB camera
  • Arduino (for connecting ToF sensor)
  • Time-of-flight sensor (ToF)
  • Lidar and USB controller

Schematic

Electronic Schematic.png

Implementation

Donkey and parts

We use the Donkey Car framework for car control. With the framework, we can easily train deep learning autonomous driving models by recording manual driving. The frameworks use modularized "parts" to manage all the components in a car. When the car runs, it loops through all parts that have been added to it. Not only sensors can be Donkey parts, controllers and actuators are also Donkey parts.

Our project involves new sensors, ToF and Lidar, that have not been included in Donkey. They should be added to Donkey in the form of parts.

We connect the Lidar and ToF(Arduino) using serial ports. We need to add our user to a group that has access to serial ports.

   sudo usermod -a -G dialout jetson

We are using YD Lidar X4. There is a python library PyLidar3 that supports this model.

To use the PyLidar3 library

Create an instance and connect

   lidar = YdLidarX4("/dev/ttyUSB0")
   lidar.Connect()

Scan

   scans = self.lidar.StartScanning()
   for scan in scans:
       for i in range(360):
           self.scan[i] = scan[i]

Stop Lidar and disconnect

   lidar.StopScanning()
   lidar.Disconnect()

We use Adruino to connect to the ToF sensor.

   myArduino = serial.Serial('/dev/ttyACM0', 115200)

Get sensor reads

   myArduino.flushInput()
   ser_bytes = myArduino.readline()
   try:
       distance = float(ser_bytes[0:len(ser_bytes) - 2].decode("utf-8"))

Donkey uses a dictionary to save data that flow through each part. The data used as input or output of parts should be defined when adding parts.

Example: adding Lidar to Vehicle in manage.py V.add(lidar, outputs=['lidar/scan', 'lidar/time'], threaded=True)

Lane changing behavior training

Donkey framework supports training different behavior states. We can use that to train a model that is able to perform lane changing. https://docs.donkeycar.com/guide/train_autopilot/#training-behavior-models

Rear collision prevention

Our first goal is to provide rear collision prevention. When another car is going to crash into the back of our car and there is no obstacle in front of our car. We can move forward to prevent a collision.

Safe lane changing

When changing lane,

Front collision prevention

Protential side collision prevention

Smart escape

Useful Knowledge

Donkey Parts

https://www.youtube.com/watch?v=YZ4ESrtfShs

How Donkey works

https://www.youtube.com/watch?v=G1JjAw_NdnE

Results

Challenges

Future Work

References

Presentations